How to connect pressure washer gun to garden hose. If you have difficulty connecting a pressure washer gun to your garden hose, then no need to worry about it.
How to connect pressure washer gun to garden hose
We are here with a handy method that will help you connect the pressure washer. 
Let’s get started.
Procedure
Identify the Hose and Washer Pressure
A standard garden hose rates 80-150 Psi (pounds per square inch). It only works for normal household functions because the water pressure coming from the household is the same as the hose pressure, 80 psi.
When the pressure washer is attached, it has a high rating psi of 1000-6000. So a hose that can handle this pressure is opted to make the hose a pressure washer.
Some garden hoses possess a pressure of 600 psi. They can handle some pressure without bursting.
Gallon per Minute GPM of Water Supply
The rate at which the water flows from your tap is required to be in gallons per minute. The standard pressure washer requires the water source to be emitting 3 gallons per minute.
It means that the water source should provide about three to five gallons in a single minute.
Measuring the Gallon per Minute GPM of Water Supply
Let’s get to know how to measure the GPM.
Take a bucket comprising a 3-gallon capacity. Place the bucket under the water source and note the time on the stopwatch. Turn on the water supply and observe the bucket.
Note down the first value. After that, repeat the same process three more times to get an average GPM value for your water source.
If the bucket gains 3-gallon before 60 sec, the water source is best for the pressure washer. Avoid using a water source with a low GPM value. It can cause damage to your pressure washers and will cost you a lot for repairing or purchasing a new washer.
Connecting Garden Hose to the Pressure Washers Water Inlet
After finding GPM, the next task is to connect the garden hose to the washer’s inlet. Make the connection secure and tight enough to prevent leakages or loose connections.
Connecting the Garden Hose to the Water Supply
Take the other end of the garden hose and connect it securely with the water source. Make the connection secure and tight enough to prevent leakages or loose connections.
Connecting the Pressure Washer Hose
When the garden hose and pressure washers are securely connected, the final step will be securing the module with the spray gun and the other end of the pressure hose to the power washer outlet water.
Test Pressure Washer Efficiently
Once you have finished connecting the garden hose and the pressure hose, now it’s time to test whether you have made the proper connections or not?
To test the pressure washer ensures the connection to a power source. Take the pressure washer and Press the trigger placed on the spray gun.
Use the washer in a particular area to check whether it is clean or not. Let the water run from the spray gun nozzle for a couple of minutes. In case of any leakages, secure the connections.
Advantages
- It cleans the dirt and mildew from the home’s exterior siding.
- The washer Brightens cement walkways and driveways with ease.
- It cleans the wood decking, bricks, and landscape stones outside the house.
- You can opt for washing your vehicles.
Conclusion
If you have difficulty connecting a pressure washer gun to your garden hose, then no need to worry about it! Follow the stepwise procedure to connect the pressure washer gun securely.
Related Guide